High quality polyurethane BS type double lip piston rod oil seal for hydraulic cylinder

Get Price
Size:90*105*11.4
Place of Origin:Sichuan, China
Brand Name:none
Model Number:BS
Material::Polyurethane
Product name:BS
Color:Green
Temperature:-35°C~ +120°C
Speed::≤0.5m/s
Application::Hydraulic and cylinder
MOQ::10PCS
Medium::Hydraulic oil, gas, water
Payment::L/C.T/TWestern Union
Shippment::By Air By Sea. DHLFedex, UP…

High quality polyurethane BS type double lip piston rod oil seal for hydraulic cylinder

Although 6YL-68 Screw oil press machine is small in size, it boasts superior oil making capacity.It can be used for various materials such as Peanuts, Rape seeds, Sesame seeds, Soybeans, cottonseeds, Tea seeds, Tung Tree seeds, Sunflower seeds, Palm kernel, Coconut meat, Corn germ, Rice bran, Almonds, Black cumin, Cacao beans, Coffee beans, Hazelnuts, Hemp seed, Jatropha, Jojoba, Linseed, Mustard seeds, Black seeds, Palm nuts, Poppy seeds, Pumpkin seeds, Shea nuts, Walnuts,etc.

Raw material

Raw materials can directly feed into the machine by hot or cold press, and press machine with filter drum in one set, so crude oil is clean and pure after filtering, if buyer don’t need refinery, it also can be directly eat and sell, it is the most ideal individual small processing oil plant.

Working priciple

(1)P-acid degumming operation:
Drawing the filtered or settled crude oilinto the neutral pot, control oil temperature 40 ° C, liquidlevel cover theneutral pot volume about 80 %.Add into theneutral pot Pacid with 85% concentration, 0.1-0.2% oil weight.Start up neutral pot, make main shalf stirring at 60-70 r/min, finish de-gumming in 30 min.
Adjust the neutral pot oil temp to about 85 °C, add into hot water whose temp higher oil temp 10-15° C, the water use amount each time is 10-15% oil weight.
(2)alkali de-acid operation
After finish degumming process, at once add into lye carrying alkali refining deacid, lye concentration 16 ° Be ′, super alkali is 0.1to0.3% oil weight, after finish adding, continuous stirring 30min, when soap particles accumulated condensing, should reduce stirring speed, 30r/min avoid emulsion. After adding alkali, gradually rising temp to the end temp 65 ° C, see to that the rising temp speed should control at 1 degree per minute, not too fast. Shut off neutral pot drive part, theoil settled in the pot 6-8 hours, make oilseparate from soap.
(3)de-coloring:
Pump the oil netralized into decolorizer vessel , samely mixing to rise its temperature to 90 degrees,then mixing for 30 mins,to reduce water to 0.1% ,then put a little clay (decoloring media) 24 % of total oil ,mixing for 30 mins ,to reduce the temperature to 70 degrees, then filte the clay with oil filter,to get the oil decolorized .

Advantage

(1) High oil yield , obvious economic benefit.
(2)Residual oil rate in the dry meal is low.
(3)Improving the quality of the meal and oil.
(4)Low processing cost , high labor productivity.
(5)High automatic and labor saving.
And more other advantages please contact me now,we will provide profession program for you,and we accept custom according your requirements.

Product Specification

Raw Material Capacity(kg/hr) Output Rate(%) Cake Residual
Rape seeds Hot pressing 150-170 30-38 7.5-8
Cold pressing 75-95 28-35
Peanut Hot pressing 150-185 35-45 7
Cold pressing 65-95 32-40
Soybean Hot pressing 135-160 10-16 6.5-7
Cold pressing 70-105 8-14
Sesame Hot pressing 150-185 44-47 6.5-7.5
Cotton seeds Cold pressing 95-105 10-14 5.5-8.5

Company Profile

Our company After 30 years development, now our company becomes an independent economic entity with the integration of science, engineering and trading department. our products and are widely accepted in both domestic and now open the world market, service to more than 100 countries, such as England, Russia, Sweden, Poland, Iran, Sudan, South Malaysia, Indonesia, Vietnam, etc.

Service

Pre-sale
System evaluation: Project basic situaction
Solution: The investment budget ,Technical discussion
Product selection: Factory inspection,Technical discussion Supply professional drawing and lists
Win-win cooperation: Sign the contract,Wstablish mutual benefit
In-sale
Design evaluation: Detailed technical assessment, Design of process and equipment layout
Procurement: Strictly inspection,optimized selection.
Installation: Quality and quantity guaranteed,Completion of hand over
Acceptance: Acceptance test , Accepted deliverables
After-sale
Technical service: Long time technical service
Accessories supplying: Supplying spare parts with cost
Complaint handling: 12-24 hours response mechanism
Client Review: Call-back , Regular return visit.

FAQ

A : Manufactured strictly based on national and international standard, and we take a test on every equipment before delivery.
5.Q:Can you install the machine in local place?
A: Yes, engineers can be dispatched to your local place for installation and commissioning, also provide operation training.
6.Q: What’s the payment terms?
A:T/T,Trade Assurance,Western Union, MoneyGram,L/C, Cash etc.

Categories: Oil Production Machine