Good quality groundnut oil extraction machine

Raw materials:It is suitable to kinds of raw materials , such as sesame, sunflower seeds, soybean, peanut, coconut, etc

Raw material

Our Oil Extraction Machine are modern products developed and improved our company newly. Automatic oil press machine is suitable for rapeseed, peanut, soybean, sunflower, rapeseed, sesame seed, tea seed, walnut, olive, corn germ, rice bran, safflower seed, seeds of hippophae rhamnoides and so on.

Working priciple

(1)P-acid degumming operation:
Drawing the filtered or settled crude oilinto the neutral pot, control oil temperature 40 ° C, liquidlevel cover theneutral pot volume about 80 %.Add into theneutral pot Pacid with 85% concentration, 0.1-0.2% oil weight.Start up neutral pot, make main shalf stirring at 60-70 r/min, finish de-gumming in 30 min.
Adjust the neutral pot oil temp to about 85 °C, add into hot water whose temp higher oil temp 10-15° C, the water use amount each time is 10-15% oil weight.
(2)alkali de-acid operation
After finish degumming process, at once add into lye carrying alkali refining deacid, lye concentration 16 ° Be ′, super alkali is 0.1to0.3% oil weight, after finish adding, continuous stirring 30min, when soap particles accumulated condensing, should reduce stirring speed, 30r/min avoid emulsion. After adding alkali, gradually rising temp to the end temp 65 ° C, see to that the rising temp speed should control at 1 degree per minute, not too fast. Shut off neutral pot drive part, theoil settled in the pot 6-8 hours, make oilseparate from soap.
(3)de-coloring:
Pump the oil netralized into decolorizer vessel , samely mixing to rise its temperature to 90 degrees,then mixing for 30 mins,to reduce water to 0.1% ,then put a little clay (decoloring media) 24 % of total oil ,mixing for 30 mins ,to reduce the temperature to 70 degrees, then filte the clay with oil filter,to get the oil decolorized .

Advantage

With Our core part the outstanding press chamber and special feeding and transmitting power systems,we realize the advanced multistage press and gradual pushing compress technology, which add more pressure points and strengthen higher press degree of the materials. Our reasonable and unique design of the inner chamber, more advanced compared with the traditional, for example, the cold press machine is main bar Exhaust type leakage design out of the press chamber , but the hot press machine is main the round Exhaust type leakage design. The other difference between the hot and cold press is the feeding and transmitting system, our super design;

Product Specification

Company Profile

Pre-Sales Service
* Inquiry and consulting support.
After-Sales Service
* Training how to install and function the machine.
* Engineers available to service machinery overseas.
* 12 months warranty and life spand service available.
* Flowchart and factory design.
* View our Factory.

Service

1.Quality warranty period is two years (except the wearing parts).Equipment must be 100% brand new when leaving factory. Malfunctions which are caused by machine-self and quality will be responsible for our manufacturer.
2. Whole lifetime maintenance free of charges.
3. Free training course at our plant.
4.Free technical support online or by phone communications&emails.
5.Our engineer can be assigned to your country for testing and training as per your requirement.

FAQ

Q: Why work with your company ?
A: We have 40 years experience in oil press machine industry, and we can help you find a great solution that can save your cost and reach your production targets. Our main products including :screw oil press, oil filter, oil refinery machine and spare parts etc.
Q: How can I judge your machine quality ?
A: Actually we already got good reputations in Russia and The Five Countries in Central Asia because of our service and stable quality. All of our machines can provide 1 year warranty and lifetime maintenance, for core parts are 6 months warranty.
Q: If i don’t know how to operate this machine ? How can i do ?
A: Our engineer will help you from the starts, and machine has been tested and fully assembled before shipping, you just needs to make 2-4 hours wear-in and then can work.
Q: What’s wear-in for new machine?
A: Using 10 KG oil cake + 1 KG sand + 1 KG water, mix them, put in oil press, wear in 3~4 hours.
1. 1st hour, adjust oil cake thickness as 3 mm.
2. 2nd hour, adjust oil cake thickness as 2.5 mm.
3. 3rd hour, adjust oil cake thickness as 2 mm.
Q:What are cold press and hot press?
A: Cold press is pressing dry and raw seeds. usually need to press 2 times to get maximum oil.
Hot press is pressing roasted seeds. usually only 1 time to get maximum oil. peanuts roast to 125~130 degree with 1~2% moisture.
Q:What service do you provide?
A: (1) 1 year free warranty, whole lifetime maintenance.
(2) Supplying wearing parts all year around.
(3) Supplying technical solutions at any time.
(4) Helping design and plan the oil plants construction.
(5) Providing installation video.
(6) Developing agents with good policies around world.

Related Posts

• R1947 Perilla Seed Castor For Seeds Corn Making In India Argan Mill Machine Seed Extractor Press Oil Expeller
• Automatic Sunflower Oil Filling Bottling Machine Equipment Production Line
• Small Oil Pressing Machine Edible Olive Oil Making Machine Cold Press
• Kitchen Oil Press Machine Electric Automatic Oil Press Extractor Organic Oil Expeller For Avocado Coconut Olive Flax Peanut Cast
• Automatic Temperature Control Oil Press
• 580 Weight Small Coconut Oil Filter Cloth Pp Mono Filter Press For Small Filter Press
• Xby Private Label 100% Organic Cold Pressed Castor Oil For Hair Eyebrow Eyelash Growth
• Temperature Control Coconut Oil Extra Virgin Cold Press Nut Oil Press Oil Extraction Machine 1000 Watt