Hot Selling Commercial Corn Sunflower Automatic Screw Oil Press

Automatic Cold Pressed Oil Extraction Castor Walnut Press Palm Refining Groundnut Peanut Oil Making Oil Expeller Machine is Suitable for rapeseed, peanut, soybean, sunflower, rapeseed, sesame, sesame seed, tea seed, walnut, olive, corn germ, rice bran, tea seed, safflower seed, seeds of hippophae rhamnoides and so on.

Raw material

Our screw type oil press machine is multifunctional, which can be applied to many kinds of common oil crops such as the ricino, coconut, almond, hemp seeds, canola,walnut, copra, palm kernels, rapeseed, coconut, cotton seeds, sesame, Neem, boaba, soybeans, flaxseed, peanuts, sunflower seeds etc.

Working priciple

Structure of oil refining machine:
1.small edible oil refinery machine structure:
The machine is consist of hydration deguming&deacidification system, filter de-coloring, transmission system, oil liquid conveying
system, transmission and lubrication system, electrical control system and machine frame.
2.hydration deguming&deacidification system of our small edible oil refinery machine:
This part is consist of mixer, deguming tank, gum outlet and transfer pipe
3.filter de-coloring system of our small edible oil refinery machine:
This part is consist of oil inlet, a sealing cover, cover handle, fine filter bucket, oil collecting tank, filter cloth, and oil outlet.
4.transmission system of our small edible oil refinery machine:
This part is consist of speed control motor, motor controller, governor and power module
5.electrical control system of our small edible oil refinery machine:
This part is consist of miniature circuit breaker, motor controller, power supply module, contactor, relay, potentiometer and knob.

Advantage

(1)The lubrication should be checked after every 50 hours of operation. The oil cup on the gearbox should not be short of oil. The screw shaft should be adjusted from the adjustment screw hole to the oil in the screw hole. Dry grinding is strictly prohibited.
(2)The parts of the oil should be protected from dust and other impurities. The quality of the oil in the gearbox should be checked once a year. If it is found to be deteriorated, all oil should be replaced.
(3) When the crushing amount is reduced and the cake or oil is not normal, the screw shaft should be taken out to check the wear of the screw, the strip and the cake ring, and the worn parts should be replaced in time.

Product Specification