Secured Oil Extraction Machine

Raw amterials: Such as copra, cottonseeds, soybean, rapeseeds, peanut, sunflower seeds, tea seeds, olive,etc.

Raw material

Edible oil press machine, which is also called oil expeller, oil extraction machine or oil mill, It can be used for various raw materials, such as soybeans, peanuts, cotton seeds, rape seeds, sesame seeds, sunflower seeds, canola seeds, coconut seeds, tea seeds, palm seeds and jatropha seeds.

Working priciple

(1)P-acid degumming operation:
Drawing the filtered or settled crude oilinto the neutral pot, control oil temperature 40 ° C, liquidlevel cover theneutral pot volume about 80 %.Add into theneutral pot Pacid with 85% concentration, 0.1-0.2% oil weight.Start up neutral pot, make main shalf stirring at 60-70 r/min, finish de-gumming in 30 min.
Adjust the neutral pot oil temp to about 85 °C, add into hot water whose temp higher oil temp 10-15° C, the water use amount each time is 10-15% oil weight.
(2)alkali de-acid operation
After finish degumming process, at once add into lye carrying alkali refining deacid, lye concentration 16 ° Be ′, super alkali is 0.1to0.3% oil weight, after finish adding, continuous stirring 30min, when soap particles accumulated condensing, should reduce stirring speed, 30r/min avoid emulsion. After adding alkali, gradually rising temp to the end temp 65 ° C, see to that the rising temp speed should control at 1 degree per minute, not too fast. Shut off neutral pot drive part, theoil settled in the pot 6-8 hours, make oilseparate from soap.
(3)de-coloring:
Pump the oil netralized into decolorizer vessel , samely mixing to rise its temperature to 90 degrees,then mixing for 30 mins,to reduce water to 0.1% ,then put a little clay (decoloring media) 24 % of total oil ,mixing for 30 mins ,to reduce the temperature to 70 degrees, then filte the clay with oil filter,to get the oil decolorized .

Advantage

Product Features
1. The pressure value is greater, the oil output rate is higher, and more safety.
2. Hard chrome electricity instead of decorative chrome.
3. The load-bearing panel and load-bearing column are made of special steel instead of ordinary steel to ensure durability and safety.
4. Each key parts have professionally inspection. No defective plate is allowed for equipment manufacturing.
5. Use high-quality motor to ensure strong heart power. Low failure rate.
6. Patent barrel, increase the oil output on the premise of ensuring strength.
7. Reduce the height of the bottom plate of the main engine, and improve the dust-proof effect of the fuel tank.

Product Specification

Company Profile

We are engaged in food grain and oil engineering design, new technology development, machinery and equipment manufacturing, engineering, installation and commissioning of the entire training services in one of the professional engineering company.
Company institutions are: engineering technology, marketing services, integrated management of the Ministry of Finance Management Department, machinery manufacturing center and research and development centers and other departments. Including engineering and technical design staff of nearly 20 people, designed to work in all computer operations, forming a set of scientific research, production and development as one of scientific research and development based engineering company.
In recent years, the company has completed hundreds of projects involving oil pre-pressing, extraction, oil refining, animal oil refinery processing, small species of oil refining and biodiesel, a project covering more than 20 domestic provinces, municipalities and autonomous regions, and exports of South Africa, Ethiopia, South Asia, Pakistan, Russia and dozens of countries, the company manufacturing may bear 2000t / d pre-crushing and leaching, 600t / d refinery, 100t / d of biodiesel and other large equipment and engineering installation and commissioning.
Companies adhere to the “credibility of the first, leading technology” business philosophy, and gradually formed a service-oriented corporate culture. Adhere to high standards, to provide customers with high quality personalized service.

Service

Our company always put the interests and quality of its clients first, insists the principle that there is no best but only better service. We will commit to provide quality products and improve on-site service and service after selling. Specific commitments are now as follows:
We will organize an experienced engineering team, managed by the Project Manager.
Ensure high-quality materials, excellent service provided to the user;
During the installation process, we will appoint a technical and installation supervision services at the scene.
We do debugging of stand-alone equipment and on-line debugging and commissioning test run to ensure normal operation of the project at full load conditions.
Supply the technical of your staff to ensure training of personnel to operate independently for free.
To ensure that once installation acceptance;
Within one month, to provide customers with qualified acceptance after completion of archive.
To ensure timely provision of equipment and accessories;
We have developed new products, new technology, will give priority to customers;
In the equipment’s warranty period (within 12 months of the date of commissioning qualified):
Due to the quality of the equipment itself damage, we will repair or replace parts.
Damage due to customer reasons, only charge the material cost for repair or replacement by the buyer. After the customer informed our company, we will put forward a propose within 24 hours, using the fastest way to resolve the issue the required components.
We are willing to supply good service on your business development.

FAQ

1.Q:Which kind of oil materials can be processed?
A: All kinds of oil seeds. For example of common oil material:soybean, rice bran, corn germ, cottonseeds, peanut, sunflower, rapeseed, palm fruit etc.
2. Q:What’s the input capacity of your machinery?
A: 5-2000 tons per day. the input capacity is according your plan or requirements to customized.
3. Q:The materials of your machinery?
A: The stainless steel and carbon steel.
4.Q:How should I do if meet some trouble while using?
A:we can supply English manual book and also take a video for showing how to resolve the problems or dispatch our worker to your factory.
5. Q:Can you install the machine in local place?
A: We will send our engineers to local place to help installing the machine and provide technical guidance.
6.Q:how long can we receive the goods?
A:delivery about 45 working day after your order,have different shipping time of different machinery,and we will inform you shipping time based on your seaport.

Related Posts

• Good Quality Refrigeration Spare Replaceable Parts D-48 Filter Drier Core
• Commercial Mini Oil Press Machine/sunflower Oil Press/cold Press Oil Machine
• Preform Blowing Machine 10 Liters Energy Saving Pet Bottle Semi-auto Blow Molding Machine
• Organic Vco
• Almond Oil Press Machine/olive Oil Press/small Cocoa Butter Hydraulic Oil Press Machine Peanut Oil Press
• Ytk-x5s Home Use Small Mini Peanut Olive Oil Press Machine
• Well Balanced Evoo Gourmet Light Fruity Italian Professional Supplier Olive Oil Extra-virgin Italy
• Premium Extra Virgin Olive Oil Mediterranea Collection Med Mix 500 Ml Tin Bottle Italian Floor Tiles