Oil Filter Press,Plate and Frame Plate Diaphragm Membrane Filter Press for Oil from Leo Filter Press,Manufacturer from China

various raw materials, as ground nuts, bean, rape and cotton seeds, sesame, olive, sunflower, coconuts and cocoa and grass seeds. However, they are suitable for medium-small sized oil extruding workshops or professional farmers. Certainly, they can be used for repressing in submerging oil workshops, too.

Raw material

Small business flaxseed sesame oil press groundnut processing oil machine is suitable with most raw materials, such as sesame, soybean, coconut, peanut, palm kernel, coffee bean, sunflower seeds, sea buckthorn seeds, moringa seeds, etc.

Working priciple

Cold pressing and hot pressing mode for oil press customer consultation:
1. Cold pressing refers to the direct pressing of materials without stir-frying;
2. Hot pressing means that the material is heated to 60-80 degrees and then put into pressing;
3. No matter cold pressing or hot pressing, our oil press must preheat. Only when the press chamber is preheated to about 200 ℃ can the oil be separated from the material.If the machine is not heated, the material will only be extruded into a paste, and the grease cannot be separated.
4. Under the cold pressing mode of the material, the normal temperature of oil coming out is about 40°, and the nutrients will not be lost. Under the material hot pressing mode, the oil yield will be higher, the oil will be more fragrant, the oil will come out at a temperature of 60-80 degrees, and some nutrients will be lost.
5. Therefore, the hot pressing mode is generally suitable for pressing rapeseed, peanuts and other low-value edible oils, and the pursuit is oil yield and aroma of cooking;
The cold pressing mode is generally suitable for pressing walnut oil, flaxseed, almond, olive kernel and other high nutritional auxiliary oil to ensure the nutrition is not lost.

Advantage

(1)The lubrication should be checked after every 50 hours of operation. The oil cup on the gearbox should not be short of oil. The screw shaft should be adjusted from the adjustment screw hole to the oil in the screw hole. Dry grinding is strictly prohibited.
(2)The parts of the oil should be protected from dust and other impurities. The quality of the oil in the gearbox should be checked once a year. If it is found to be deteriorated, all oil should be replaced.
(3) When the crushing amount is reduced and the cake or oil is not normal, the screw shaft should be taken out to check the wear of the screw, the strip and the cake ring, and the worn parts should be replaced in time.

Product Specification

Company Profile

Since 1982 oil press machine
1. More than 20 years of foreign trade export experience.
2. The professional design R&D team, backed by the university and guided by the market to updated the products.
3. Our products exported to the United States, India, South Korea, Russia, Somalia, Ethiopia, Sudan, Bulgaria and other countries and regions, and got very good reputation.

Service

Our company always put the interests and quality of its clients first, insists the principle that there is no best but only better service. We will commit to provide quality products and improve on-site service and service after selling. Specific commitments are now as follows:
We will organize an experienced engineering team, managed by the Project Manager.
Ensure high-quality materials, excellent service provided to the user;
During the installation process, we will appoint a technical and installation supervision services at the scene.
We do debugging of stand-alone equipment and on-line debugging and commissioning test run to ensure normal operation of the project at full load conditions.
Supply the technical of your staff to ensure training of personnel to operate independently for free.
To ensure that once installation acceptance;
Within one month, to provide customers with qualified acceptance after completion of archive.
To ensure timely provision of equipment and accessories;
We have developed new products, new technology, will give priority to customers;
In the equipment’s warranty period (within 12 months of the date of commissioning qualified):
Due to the quality of the equipment itself damage, we will repair or replace parts.
Damage due to customer reasons, only charge the material cost for repair or replacement by the buyer. After the customer informed our company, we will put forward a propose within 24 hours, using the fastest way to resolve the issue the required components.
We are willing to supply good service on your business development.

FAQ

Q1：WHY BUY FROM US?
1) As a real manufacturer, we can supply the best quality machines with reasonable price.
2) All the machines pictures and features are real, captured by us, NO Cheating, NO Fraud.
3) We are able to get the exactly products for you since we know these machines very well
4) We can supply the parts and service in long future.
Q2: ARE YOU A NEW MANUFACTURER?
A2：We are a major oil press manufacture with a long history in China， in the past decades, we’re focused on domestic market and exporters.
Q3: DO YOU HAVE OTHER PRODUCTS ?
A3: Yes, we do have a lot of products over than this sit, please feel free to ask us any questions about our products.

Related Posts

• Big Capacity 140-160 Tpd Sunflower Oil Processing Oil Mill Expeller Peanut Oil Press Machine For Plant
• Vending Machine Spring,Wave Spring
• Small Household Stainless Steel Peanut Oil Press
• Kis-900 Automatic Rotary Hummus Cup Filling Sealing Machine Paste Filler Sealer Machinery
• Corn Oil Production Line Complete System For Cooking Oil Machinery From Cpo Cold Press Oil Machine Peanut
• Beer Canning Machines Complete Production Line
• Edible Black Cumin Seed Oil Press Machine Price
• High Efficeney Multi-functional Walnut Tea Seed Oil Press Full Automatic Hydraulic Sesame Oil Machine