Coconut nut oil milling machine / palm kernel oil mill

It can be used for oil extraction from peanut kernel, sunflower seed kernel,cotton seed, soybeans, rapeseed,safflower seed,castor seed and other oil crops.

Raw material

The Oil press is used to get the edible oil or bio-diesel from vegetable oilseed and plant. Suitable for extracting different vegetable oil-materials, such as rapeseed, peanut, soybean, seasame seed, cottonseed, coconut,, etc

Working priciple

(1)P-acid degumming operation:
Drawing the filtered or settled crude oilinto the neutral pot, control oil temperature 40 ° C, liquidlevel cover theneutral pot volume about 80 %.Add into theneutral pot Pacid with 85% concentration, 0.1-0.2% oil weight.Start up neutral pot, make main shalf stirring at 60-70 r/min, finish de-gumming in 30 min.
Adjust the neutral pot oil temp to about 85 °C, add into hot water whose temp higher oil temp 10-15° C, the water use amount each time is 10-15% oil weight.
(2)alkali de-acid operation
After finish degumming process, at once add into lye carrying alkali refining deacid, lye concentration 16 ° Be ′, super alkali is 0.1to0.3% oil weight, after finish adding, continuous stirring 30min, when soap particles accumulated condensing, should reduce stirring speed, 30r/min avoid emulsion. After adding alkali, gradually rising temp to the end temp 65 ° C, see to that the rising temp speed should control at 1 degree per minute, not too fast. Shut off neutral pot drive part, theoil settled in the pot 6-8 hours, make oilseparate from soap.
(3)de-coloring:
Pump the oil netralized into decolorizer vessel , samely mixing to rise its temperature to 90 degrees,then mixing for 30 mins,to reduce water to 0.1% ,then put a little clay (decoloring media) 24 % of total oil ,mixing for 30 mins ,to reduce the temperature to 70 degrees, then filte the clay with oil filter,to get the oil decolorized .

Advantage

1 sesame seeds: before entering the press will be the seeds of coffee color is better, (observe the seed color with the hands of Pi Niekai), there are burst phenomenon, stir fry seeds to keep two small fire, the middle of the fire. The pressing temperature 140-150 C, water 1-1.2%, cake for a long strip shape.
2. Rapeseed: first with the fire fierce speculation to rapeseed hot, explosion sound so far, then switch to a small fire fried to rapeseed pinch opening was brownish red, pressing rapeseed temperature of 130 DEG C, moisture 1-1.5%, cake thick ness, a small flake, brownish red.
3. Peanut: fried seeds before, will be peanuts soaked again, seeds frying in the process, the kernel is fried to eight mature, pinched by hand, achieve benevolence, skin separation, benevolence is a pale yellow, about 130 DEG C temperature, water 1-2%, 0.7 to 1.2 mm thick cake, cake is sliver shaped wrinkles, smooth oil.
4 Cottonseed Kernel: before entering the squeeze oil to light yellow, temperature 120-130 C, water 1.5-2.5%, cake thickness 1-1.5 (south, north of the water is not a, proper control of water). 80-100 C, water 6-8%, every time the cake thickness 1.5-2mm, second times the cake thickness 0.7mm, but the two times the yield will be decreased.
5 sunflower: raw material to be selected, the raw water before the seed soaking, medium heat and stir fry seeds, the pressing temperature 120-130 degrees Celsius, water 1-2%.
6. Soybean: pressing before fry to burst edible, 120-130 degrees Celsius temperature, moisture 1.5-2.8%, cake thickness 0.7mm, dry again, but again dry cake material too coke, the protein loss is larger. Can be used to process two times dry, soybean fry six or seven mature, pressing temperature

Product Specification

Company Profile

We are a large scale oil machinery manufacturer integrating research, development, design, manufacture and installation. Established in 1982, we have 210 senior engineering technicians among 580 staff, with investment amount of USD60,000.000, covering 10 hectares of factory area, 8 production workshops, 2 machining workshops,12 installation departments.We have 202 sets of automatic processing equipment, annual processing capacity is more than 3000 sets.
Our oil machines sell well in more than 30 provinces, cities and districts, and exported to Kazakhstan, Tajikistan, Uzbekistan, Russia, Bolivia, Peru, Egypt, Bangladesh, Myanmar, Malaysia, Indonesia,Solomon Islands, Sudan, Rwanda and other countries and regions, and now we have developed into a major oil machinery manufacturing base in China.

Service

Pre-sale services:
Act as a good adviser and assistant of clients; enable them to get rich and generous returns on their investment
(1) Select equipment model;
(2) Design and manufacture products according to clients’ special requirement;
(3) Train technical personnel for clients.
After-sale services:
(1) Assist clients to prepare for first construction scheme;
(2) Install and debug the equipment;
(3) Examine the equipment regularly;
(4)Take initiative to eliminate the troubles rapidly at site;
(5)Provide technical exchanging;
(6)Provide maintenance for big items

FAQ

1.What’s your advantage?
A: Honest business with competitive price and professional service on export process.
2. How I believe you?
A : We consider honest as the life of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.
3.How can I know how my order is being done?
A:We will inspect and test all items in order to avoid damage and missing parts before shipping. The detailed inspection pictures of the order will be sent to you for your confirmation before delivery.
4.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service. For the overseas orders, we guarantee most accessories. Provided emails with details including pictures or short video, we will send guide manual or replacements at our cost to repair.
5.Where are you? Can I visit you?
A: Sure,welcome to you visit our factory at any time.
6.How about the delivery time?
A: Within 15-35 days after we confirm you requirement.
7.what kind of payment does your company support?
A: T/T, L/C, Cash, Western Union are all accepted if you have other payment,please contact me.

Related Posts

• Automatic 30ml 50ml 60ml Cbd Hemp Oil Spray Bottle Filling And Capping Machine
• Cast Iron Tortilla Press Oil Plant Coating
• Oil Extraction Machine Cooking Oil Making Machine For Oil Pressers Small Size Stainless Steel Home
• Ytk-rg311 Factory Supply Food Grade Oil Press Machine Oil Pressers
• Ground Nut Oil Making Machine Hot Oil Making Machine Groundnut Oil Processing Machine
• 100g Must Buy This T-free Cb D 8 9 10 Oil Plant Extracted Liquid-solid Extraction Cbd
• R1796 Perilla Seed Grain Seed Black Cumin Press Mustard Mill Extraction Machine 10 Ton Capacity Oil Expeller
• Sunflower Oil